WIN system 3WLS Point I >> Software driver & Brochure Download
Machines that support the MAC version will mark the MAC & WIN on the front right
Introduction to the opening of the box
Before carving, it is recommended to test the material carving effect first,
Engraving depth 5% start, from shallow to deep adjustment test ~ To achieve the best results
Upgrade 3WLS & LSD3
Product features and Generation differences:
1. The difference in software, do not need to adjust the laser strength only need to adjust the depth, software operation is simpler
2. Power increased to 3W more than the original 1.5w adjustable material, can directly do paper carving, can carve more materials.
3. Engraving speed 18 times times faster. The same pattern used to carve for 1.5 hours, and now it only takes 5 minutes
4. Use DC12V safety voltage.
5. Laser head is more durable: can not rest for 10 hours in a row, the past 3 hours to rest 5-10 minutes
6. Advanced is more suitable for business DIY, compared to a generation for personal exclusive.
Product Features:
1. No base four-legged design is not subject to product height restrictions (can be based on the product self-rack high machine)
2. The simplest method of operation in history ~ Adjust the laser focus, after the installation of the software after >>a drag photo >> B Reset size >> Adjust depth >> C Preview range >> D start printing
3. Machine size is very small and easy to carry
4. Universal power supply using ultra-safe voltages: DC-12V (2A)
5. General business use, personal pattern/exclusive Logo production/play your ideas at any time
6. Create a small mini factory for individuals
7. Single Maximum carving area 8cm*8cm
8. The use of laser power 3W=3000mw
Scope of application:
Business Store/seal engraving/product design/Teacher teaching/office/school/Puzzle Education/Personal logo, etc...
Can be carved material:Wood, bamboo, PCB, leather, paper and other combustible substances are carved, such as: mouse, pencil, business card, wallet, wood/plastic, etc.
Non-engraving materials:Metals, glass, stone, ceramics, marble, transparent objects, white reflective objects, and other non-combustible materials
Product Specifications:
HANLIN Upgrade 3W Mini Laser engraving machine
Brand:HANLIN
Model:3WLS
Shell material:ABS
Minimum engraving fonts:2mm*2mm
Precision:0.075mm
Laser power:3W（10000hrs）
Engraving area:80×80(mm)
Power supply:DC-12V （2A)
Product Volume:15.5×16.6×14.3(cm)
Packaging size:26×22.7×19.2(cm)
Weight:0.56(kg)
Support System:WIN XP/WIN 7/WIN 8/WIN 10
Support file formats:JPEG/JPG/PNG/BMP
Accessories:USB Portable discs, engraving materials, screws, protective panels, power supplies, data cables, instructions
Precautions:
1. Laser head consumables are not covered by warranty
2. Laser head concentration focus needs to be adjusted to 1mm to have a good fineness
3. Before carving, it is recommended to test the material engraving effect, carving depth 5%~200% from shallow to deep to achieve the best results
4. Do not look directly at the laser light to avoid long-term damage to the eyes
5. Engraving plastic materials may produce harmful gases please use in a ventilated place
6. Children's Operation please accompany the teaching of adults
7. When the operation of the machine is strictly prohibited, the laser concentration point avoids contact with the human body to avoid burning
8.If 10 hours of continuous operation of the machine it is recommended to rest for 10 minutes
9. This machine for general business, and personal exclusive, non-industrial use, so the carving speed can not be compared to industry
Frequently Q & A:
1. What about the opposite direction of the machine's original engraving product?
A: Because it is possible to press the settings when operating, please follow the method below
If left and right, solution: At the same time hold down the white right button plus the key does not move for 8-10 seconds, when the laser flashes at the same time release on the good
If up and down, solution: while holding down the white left button plus the key does not move for 8-10 seconds, when the laser flashes at the same time release on the good
(Two hands must be held down two keys at the same time, must be pressed at the same time!!) )
2. Why is the lower half of the picture engraved incomplete?
A: File format BMP is not supported, or file error
WORKAROUND: Please change the file to a common JPG or PNG file
3. Install the program to unzip the file case damage problem?
A: Copy the compressed files in the portable disc and unzip them to the desktop.
Note: You cannot unzip the carry-on disc or it may be damaged by the file.
Correct operation: →1. First create a folder on the desktop →2. Copy the Carry-on disc file to the Desktop folder →3 unzip(If the file is missing, please scan the QR-code re-download software)
4. The fan does not rotate?
A. The fan will not function until the machine presses the fan symbol in the software to start carving
b. If there is no reaction to the above operation, it is possible that the contact at the interface is poor due to the shaking of the shipping process, please follow the flat cable of the fan to find at the circuit board interface, move or press the connector slightly left or right
5. Why can't you carve something?
A: The focus is not adjusted good laser dizziness open!
B: or the relevant material is not in the range that can be carved!
6. After carving, in addition to carving content, why there will be white bottom?
A: Please use black and white mode, do not use grayscale mode!
7. Questions about the height of the machine rack:
Laser focus maximum limit must be adjusted to the bottom of the machine foot 0.5cm to the laser head to do carving, more than the laser carving focus range can not be normal carving! (A High object does not allow the machine to produce any shaking)
8.Can the machine be carved into transparent material?
A: After you want to carve that side coated with a black whiteboard pen, the carving can be wiped off
B: Thin black paper tape can also
